Coleman 5327 Series Supplementary Manual

5327_RecycleBatteryRev.qxd
Housing
BATTERY PACK REMOVAL
1. Open the main housing of the unit by removing the 4 screws in the
base and removing the base.
2. The battery pack is secured to the housing with foam adhesive pads.
If the battery pack has leaked or vented, wear protective gloves and
eyewear before continuing. A screwdriver may be needed to pry and
release the battery from its position in the housing. Pull the battery
pack from its position and set beside the lantern.
3. Pull the red and black wires from the battery by grasping the slide-off
clips and pulling outward from the terminals. Never cut the red and
black wires to remove the battery.
4. Remove the battery pack and place it in a small plastic bag.
5. Properly recycle or dispose of the battery and the remains of the light.
Do not apply electrical power to the unit once the battery pack
has been removed or when the housing is not intact.
6. Contact 1-800-8-Battery (1-800-822-8837) for a disposal
location near you.
1/18/07 4:30 PM
DO SOMETHING
POSITIVE FOR
THE ENVIRONMENT
RECYCLE
MODEL 5327 FAMILY-SIZE
SERIES LANTERN
PLEASE RETAIN
INSTRUCTIONS
FOR FUTURE USE
Base
2 Wires
Battery Pack
Screws (4)
Page 1
This product uses a Lead Acid Sealed
Rechargeable Battery Pack. The battery
pack is Recyclable .
At the end of the battery pack's useful life, it
should be removed from the unit and be
recycled or properly disposed of.
Do not discard in a landfill or
incinerate the battery pack.
The Coleman Company is a licensee of the
Rechargeable Battery Recycling Corporation
(RBRC), an international company formed to
create, promote, and run a rechargeable
battery recycling program.
Since the early days of the Coleman company,
nearly 100 years ago, Coleman has been
concerned about protecting our environment.
So it's natural that Coleman be a RBRC
licensee. Since 1996, lawmakers passed
a federal law for a national
battery recycling policy.
02/06 Rev