Napoleon Cara Elite Installation And Operation Manual page 12

installation
EN
3 13/16"
(96mm)
1 9/16"
(40mm)
20 1/4"
(51.5cm)
31 1/2"
14 3/8"
(80cm)
(36.4cm)
3. Using the wall mounting installation template (Fig. 2), mark out the locations of the rear wall bracket and bot-
tom brackets on the wall.
4. Install the rear wall bracket onto the wall using 14 screws (supplied).
note:
The rear wall bracket MUST have hooks facing upward and be level.
note:
It is strongly recommended that the rear wall bracket be screwed into the wall studs where possible. If the
wall studs cannot be used, ensure that the plastic anchors (supplied) are used to affix the bracket to the wall
and the bracket is adequately secured.
5. Install the bottom brackets onto the wall using 4 screws (supplied).
6. Lift the appliance up until the two mounting slots clear the hooks on the rear wall bracket. Slide appliance
down until completely secured.
7. Secure the appliance to the bottom brackets using 4 screws (supplied) (Fig. 3).
12
W415-2960 / B / 06.07.22
33 1/16" (84cm)
16" (40.6cm)
4 3/4"
(120mm)
10 7/16" (26.5cm)
2 3/4" (70mm)
68 7/8" (175cm)
16" (40.6cm)
31 7/8" (80.1cm)
59 1/16" (150cm)
＠
＠
＠
W a ll m o u n tin g in s ta lla tio n te m p la te
2 3/4" (70mm)
Fig. 2
⑥
⑨
A x14
⑥
⑨
A x4
⑥
⑨
C x4
Fig. 3