#
Installation
Install the parts in the reverse order of
1.
removal. Always connect the positive +
terminal first. Make sure that bolts and
nuts are tight.
Tighten the positive + terminal bolt and
2.
negative - terminal bolt to the specified
torque:
Torque: 1.5 lbf·ft (2 N·m, 0.2 kgf·m)
Install the battery band and seat.
3.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
P. 22
2
P. 53
2
P. 68
2
Removing & Installing Body Components
Battery
u
59