Advertisement
Installation and starting up
3
Installation and starting up
Wiring
Powerplant Junior
10
Power Supply
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
Create all connections while the device is not connected to the mains. Use the supplied cables
for all connections.
The following cable types are available:
5 standard cables (1:1), length 30 cm, each to supply one effects pedal
n
5 standard cables (1:1), length 60 cm, each to supply one effects pedal
n
1 Y-cable to supply one effects pedal with higher power consumption
n
1 serial cable to supply a maximum of 5 effects devices from one 9 V output socket of the
n
power supply
Advertisement
