Table of contents Table of contents General information..........................5 1.1 Further information........................... 6 1.2 Symbols and signal words....................... 6 Safety instructions............................. 8 Installation and starting up........................ 10 Components and functions........................ 14 Technical specifications........................15 Protecting the environment......................17 Powerplant Junior Power Supply...
Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de. Powerplant Junior Power Supply...
If you have any problems with the device the customer service will Service gladly assist you. 1.2 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Powerplant Junior Power Supply...
Page 7
This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided. Warning signs Type of danger Warning – high-voltage. Warning – danger zone. Powerplant Junior Power Supply...
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. Powerplant Junior Power Supply...
Page 9
The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if neces‐ sary, i.e. felt pads or similar. Powerplant Junior Power Supply...
5 standard cables (1:1), length 60 cm, each to supply one effects pedal 1 Y-cable to supply one effects pedal with higher power consumption 1 serial cable to supply a maximum of 5 effects devices from one 9 V output socket of the power supply Powerplant Junior Power Supply...
Page 11
9 V output socket of the power supply. In order to avoid an overload of the power supply, the current draw of each connected pedal must not exceed 120 mA. Powerplant Junior Power Supply...
Page 12
Y-cable to two 9 V output sockets of the power supply. In order to avoid an overload of the power supply, the current draw of the effects pedal must not exceed 240 mA. Powerplant Junior Power Supply...
Page 13
The total current draw of all effects devices connected via the serial cable must not exceed 120 mA; thus leaving a maximum of 24 mA to each effects pedal when using devices of the same kind. Powerplant Junior Power Supply...
Components and functions Components and functions 1…5 Output sockets for 9 V 6 Red control light. Indicates that the device is connected to the power supply. Powerplant Junior Power Supply...
Output voltage 5 × 9 V (DC) Dimensions (W × H × D) 116 mm × 38 mm × 77 mm Weight 920 g Ambient conditions Temperature range 0 °C…40 °C Relative humidity 20 %…80 % (non-condensing) Powerplant Junior Power Supply...
Page 16
Technical specifications Further information 12 V 18 V Other secondary voltage DC/AC current AC/DC Multi-power supply Powerplant Junior Power Supply...
Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. Powerplant Junior Power Supply...