Advertisement
3.
Use both hands to place the device on the slide rails and slide the device along the slide rails
until the mounting brackets on the device touch the front rack posts. Use a Phillips screwdriver
to fasten the captive screws in the mounting brackets to secure the device to the rack.
After you slide the device into the rack, make sure the bottom edge of the slide rails is in close
contact with the device bottom.
Figure4-3 Securing the device to the rack
5
Installing a power supply
1.
Remove the filler panel from the power supply slot.
2.
Push the AC power supply into the slot until it snaps into place.
Figure5-1 Installing the power supply
4
Advertisement
