Table of Contents
Advertisement
5.6.
Replacing the thermal fuse.
1
Remove the base, body assembly.
• Disassemble the base by referring to Step (1) as shown in 5.1.
• Refer to the method of replacing the body assembly to remove the body assembly.
2
Disassemble the connectiong between the thermal fuse and the heating plate
• Disassemble the connection between the thermal fuse and the heat-
ing plate.
3
Remove the temperature fuse holder, and take out the thermal fuse
• Remove the fixing screws from the theral fuse holder, peel off the
aluminum foil tape, and remove the holder and the thermal fuse.
• Directly take out the thermal fuse.
4
Reassembly
• Conduct assembly after thermal fuse replacement as per the disassembly steps in a reversed way.
Note:
• Do not make temperature fuse deformed when assembling.
• Do not make temperature fuse tilting when assembling.
• Do not damage the lead, insulating sheet, etc. when mounting the thermal fuse on the holder.
14
Advertisement
Table of Contents
