Push Button Master Power Switch SD Card Slot You find two LED bars on the antenna end of your OmniAccess 3500 NLG card. From bottom to top on the right of the Alcatel-Lucent logo: • LED A (3G Modem) can be in one of the following states: o No light: 3G modem is off.
No IPsec VPN client is installed in your laptop (if there are any, they must be uninstalled). • The Master Power Switch of your OmniAccess 3500 NLG card is set to the ON position (towards the antenna end of the card). You must obtain the following information from your administrator to download the client software and complete the installation of your card: •...
Page 4
Installing the OmniAccess 3500 NLG Software and Card Warning: Do not insert your card without first downloading the OmniAccess 3500 NLG client software to your laptop and starting the installation procedure. If you have not been instructed otherwise by your IT administrator, follow the first six steps below to download the OmniAccess 3500 NLG client software to your laptop: Navigate your browser to the following URL: http://www.nonstopguardian.com.
Page 5
The following steps are the same irrespective of the method used by your enterprise for distribution of the OmniAccess 3500 NLG client software: After you click Run or launch the executable file on your laptop an Alcatel-Lucent OmniAccess 3500 NLG Client License window appears.
Page 6
10. Click Next to continue. 11. Enter your name and your company’s name on the NLG Client Software Installation (NLG Client user register details) window.
Page 7
12. Click Next to continue. 13. A Setup Status window appears, with visual indication of the progress made in the installation of the client software. 14. A Software Installation warning window also appears. (If this window does not appear, you will see an icon on the bottom toolbar. Click the icon to display the window on the screen.) Click Continue Anyway on the warning window.
Page 8
15. Click Continue Anyway on the six Hardware Installation warning windows that follow. 16. An OmniAccess 3500 NLG Client Setup window appears, asking if you want to restart your computer. 17. Select Yes, I want to restart my computer now and click Finish to restart your laptop now.
Page 9
21. On the next window, select Install the software automatically and click Next. 22. Click Continue Anyway through the multiple warning windows. 23. Click Finish. An OmniAccess 3500 NLG icon appears on your desktop. 24. After waiting a few minutes for processing to finish, double-click the OmniAccess 3500 NLG icon.
Page 10
PC once the card is activated. 29. If necessary, activate your modem with your 3G wireless carrier. On the OmniAccess 3500 NLG Client window, click Modem Activation under the 3G menu. The Modem Activation window appears.
Page 11
33. Installation is complete. If your laptop has network access available, you are automatically connected to your corporate network. Note: The Li-Ion battery of your OmniAccess 3500 NLG card (not user-replaceable) might not come fully charged from the factory. To charge it, please leave the card...
2 hours. Handling the Card Your OmniAccess 3500 NLG card must be plugged into your laptop in order for you to be able to use the laptop. To remove your card from the laptop, gently pull the card out of its slot using the grippers on the side of the card.