Table of Contents
Advertisement
16
www.aeg.com
8.5 Vlekken/Voorw. - Taches/
Prélav.
Press this button repeatedly to activate
one of the two options.
The relevant indicator goes on in the
display.
• Vlekken - Taches
Select this option to add an anti-stain
phase to a programme in order to
treat heavily soiled or stained laundry
with stain remover.
Pour the stain remover into
compartment
will be added in the appropriate phase
of the washing programme.
This option is not
available with a
temperature lower than
40 °C.
• Voorwas - Prélavage
Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
The options can increase the
programme duration.
8.6 Extra
With this button you can select one of the
following options:
• Skipping wash phase - Alleen
spoelen - Rinçage option
The appliance performs only the
rinsing phase, the spinning and the
draining phases of the selected
programme. When this option is set
the washing phase is not performed.
• Centrif./Pompen - Essorage/
Vidange option
The appliance performs only final
spinning or only draining phase of
selected programme. By selecting No
Spin
Essorage button only Drain cycle can
be configured.
The corresponding indicator above the
touch button illuminates.
. The stain remover
option via Centrifugeren -
8.7 Extra spoelen - Rinçage
Plus
With this option you can add a few rinses
according to the selected washing
programme.
Use this option for people with allergies
to detergent residues and with sensitive
skin.
This option increases the
programme duration.
The related indicator comes on.
8.8 Makkelijk strijken -
Repassage Facile
The appliance carefully washes and
spins the laundry to prevent the creases.
The appliance decreases the spin speed,
uses more water and adapts the
programme duration to the type of
laundry.
The related indicator comes on.
8.9 Start/Pauze - Départ/
Pause
Touch the Start/Pauze - Départ/Pause
button to start, pause the appliance or
interrupt a running programme.
8.10 Startuitstel - Départ
Différé
With this option you can delay the start of
a programme in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pauze - Départ/
Pause button, the display shows the
indicator
and the selected delay time
and the appliance begins the countdown.
8.11 Tijd besparen - Gain de
temps
With this option you can decrease the
programme duration.
Advertisement
Table of Contents
