PSB ALPHA iQ Manual page 6

8. Aux
Using the supplied 3.5mm analog cable to connect one end to AUX input and the opposite end to the selected analog audio
•
source.
9. HDMI
Use HDMI cable (not supplied) to connect this HDMI port to corresponding HDMI port of TV. Use HDMI cable that has Ultra-High-
•
Speed HDMI Certification Label to enjoy support for larger bandwidth and high bitrate format.
Ensure that the audio setting/format of the connected device to ALPHA iQ is set to PCM only.
•
Only audio output signal from TV is supported by the Alpha iQ via the HDMI port.
•
10. LAN
LAN connection must be set up for wired connection to be established. Set up a Wired Ethernet broadband router with broadband
•
internet connection. Your router or home network should have a built-in DHCP server to consummate the connection.
Using the supplied Ethernet cable, connect one end of the Ethernet cable to the LAN port of your wired Ethernet broadband router
•
and the other end to ALPHA iQ's LAN port.
Notes
PSB is not responsible for any malfunction of the ALPHA iQ and/or the internet connection due to communication errors
or malfunctions associated with your broadband internet connection or other connected equipment. Contact your Internet
Service Provider (ISP) for assistance or the service bureau of your other equipment.
Contact your ISP for policies, charges, content restrictions, service limitations, bandwidth, repair and other related issues
pertinent to internet connectivity.
11. USB
Connect to this USB port a USB mass storage device formatted as FAT32, NTFS or Linux ext4. The connected USB device appears
•
as a Local Source (USB) in the BluOS App.
Access and playback music stored in the connected USB device by selecting "USB" from the BluOS App.
•
Back Panel - Secondary Speaker
12
13
14