Table of Contents
Advertisement
Back Panel - Primary Speaker
3
4
5
6
3. Ground
Connect to this Ground terminal if your turntable includes a ground/earth lead.
•
If necessary, use this Ground terminal to connect to ground a phono or turntable source for PHONO input.
•
If a separate earth ground is necessary, use this terminal to ground your Alpha iQ.
•
The Alpha iQ can be connected to Ground by connecting a ground lead wire or similar to this terminal. After insertion, tighten the
•
terminal to secure the lead.
4. Phono
Input for a Moving Magnet (MM) phono cartridge only.
•
5. Sub Out
Connect to low-level input of an external active subwoofer using a subwoofer interconnect cable.
•
With your Subwoofer connected, go to Audio in the Settings menu of the BluOS App. Enable your Subwoofer under
•
Subwoofer option and set preferred crossover settings under Crossover option.
6. Power Inlet (Primary)
The ALPHA iQ comes supplied with two pairs of power cords. Select the power cord appropriate for your region.
•
Before connecting the power cord's plug to the mains power outlet, ensure that the other end of the power cord is firmly
•
connected to ALPHA iQ's Power Inlet.
Always disconnect the power cord's plug from the mains power outlet before disconnecting the other end of the power cord from
•
the ALPHA iQ's Power Inlet.
7. Optical
Using a TOSLINK optical cable (not supplied), connect to corresponding optical digital output of sources such as CD or BD/DVD
•
players, digital cable box, digital tuners and other applicable components.
7
8
9
10
11
Advertisement
Table of Contents
