Nedis 4IN1CBW10WT, 4IN1CDW10WT - CCTV Security Camera Manual

Intended use

This product is exclusively intended as a security camera.
Any modification of the product may have consequences for safety, warranty and proper functioning.

Main parts

1. Joystick
2. BNC connector (female)
3. 5.5 mm DC connector (female)
4. Camera head
5. Orientation indicator
6. Infrared LEDs
7. Lens
8. PIR sensor
9. Screw (3x)
10. Plug (3x)

Safety instructions

• Only use the product as described in this manual.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
• Do not open the product.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• Disconnect the product from the power outlet and other equipment if problems occur.
• Keep the product out of reach from children.

Preparing the security camera

To connect the camera, you need a Digital Video Recorder (DVR) that is connected to a monitor.

1. Connect BNC connector to a DVR with a BNC cable (not included).
2. Connect DC connector to a 12 VDC power adapter (not included).
3. Insert the power adapter into a power outlet.

Selecting video format

Set up the correct signal before mounting the camera.

1. Choose the desired input signal format to send to the DVR.
2. Tilt and hold Joystick for 3 seconds in the desired direction.
3. The security camera is now ready for use.

Settings menu

1. Up
2. Left
3. Down
4. Right
5. Confirm (press)

If desired, change the settings before mounting the camera.

1. Press Joystick to enter the On-screen Display (OSD) menu.
2. Tilt Joystick to navigate through the menu.
3. Press Joystick to select and confirm settings.

OSD menu settings

Mounting the security camera

You can mount the camera to a wall or ceiling.

1. Ensure that orientation indicator is at the top.
2. Draw three marks to indicate the desired location.
3. Drill the holes and place the plugs.
4. Fasten the camera with screws.
5. Rotate camera head in the desired angle.

Specifications

Nedis BV
De Tweeling 28, 5215 MC 's-Hertogenbosch – The Netherlands