Download Print this page
Control Techniques 304K Quick Start Manual

Control Techniques 304K Quick Start Manual

Operator interface with tft display

Advertisement

Quick Links

Tel +1 952 995 8000
Fax +1 952 995 8099
www.emersonct.com
MODEL 304K - OPERATOR INTERFACE WITH TFT DISPLAY
GENERAL DESCRIPTION
The 4.3-inch CTVUE-304K was designed for applications in which available
mounting space is at a premium. Though diminutive in size, the 304K boasts a
bright TFT display with full 256-color support. With a resolution of 480 x 272,
the 4.3-inch display has a higher resolution and better image clarity than most
6-inch HMIs.
The 304K offers two high-speed serial ports in the form of one RS-232 and
one RS-232/422/485 ports. This allows the operator interface to simultaneously
communicate with devices from different manufacturers, as well as to perform
protocol conversion.
The 304K is programmed with CTVue Configurator Software. The software
offers easy to use drag and drop communications configuration, while the
embedded image library allows the programmer to create intuitive screens and
prompts for the operator.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in the
manual or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
Do not use the controller to directly command motors, valves, or other
actuators not equipped with safeguards. To do so can be potentially harmful to
persons or equipment in the event of a fault to the unit.
CAUTION: Risk Of Danger.
Read complete instructions prior to
installation and operation of the unit.
CAUTION: Risk of electric shock.
CONFIGURED USING CTVue CONFIGURATOR SOFTWARE
TWO SERIAL COMMUNICATIONS PORTS
(1 RS-232 AND 1 RS-232/422/485)
UNIT'S CONFIGURATION IS STORED IN NON-VOLATILE FLASH
MEMORY
BRIGHT 4.3-INCH TFT ACTIVE MATRIX 256 COLOR 480 x 272
PIXEL DISPLAY
THREE FRONT PANEL LED INDICATORS
NEMA 4/IP65 FRONT PANEL
POWER UNIT FROM 12-28 VDC
RESISTIVE ANALOG TOUCHSCREEN
CONTENTS OF PACKAGE
- 304K Operator Interface.
- Hardware packet for mounting unit into panel.
- Terminal block for connecting power.
- Spare fuse.
ORDERING INFORMATION
DESCRIPTION
"
4.3
TFT Operator Interface
CTVUE Programming Software CD
USB to RS-232 Adaptor, includes "y" cable
Female DB9 to RS-485 Adaptor, 2-wire
"Y" Cable
1
Bulletin No. CTVUE-304K-X
Drawing No. LP0798
Effective 05/09
PART NUMBER
CTVUE-304K
CTVUE-CONFIG-CD
CTVUE-USB-232
CTVUE-ADK-485
CTVUE-SK0-000
400370-09, Rev: X

Advertisement

loading

Summary of Contents for Control Techniques 304K

  • Page 1 The 4.3-inch CTVUE-304K was designed for applications in which available - 304K Operator Interface. mounting space is at a premium. Though diminutive in size, the 304K boasts a - Hardware packet for mounting unit into panel. bright TFT display with full 256-color support. With a resolution of 480 x 272, - Terminal block for connecting power.
  • Page 2 4.661 (118.4) 1.262 (32) 4.016 3.638 (102) (92.4) 304K nstallIng and owerIng the MOUNTING INSTRUCTIONS 4.685 (119) The unit can be mounted into enclosures with a depth of 4". It is recommended that the unit be mounted on the front panel of a steel enclosure.
  • Page 3 POWER SUPPLY REQUIREMENTS The 304K requires a 12-28 VDC power supply. Please take care to observe the following points: - The wire used to connect the operator interface’s power supply should be at least 22-gage wire. If a longer cable run is used, a heavier gage wire should be used.
  • Page 4 There are three front panel LEDs. Shown below is the default status of If for any reason you have trouble operating, connecting, or simply have the LEDs. questions concerning your new 304K, contact Control Techniques’s technical support. For contact information, refer to the front page of this bulletin for INDICATION phone and fax numbers.