Emotiva UMC-1 Operation Manual page 15

HDMI Connection - Connect a high quality HDMI cable to the HDMI OUT on the player and to one of the five HDMI
INPUTS on the UMC-1. This connection will give you the best video quality. This connection will also carry the audio
from the DVD and/or BluRay player to your UMC-1.
Component Video Connection - You can also connect a DVD and/or BluRay player using the component video out on
the player to the component video in on the UMC-1. When connecting to the UMC-1 using this method, you will have
to use a separate cable to carry the audio to the UMC-1. This can be done with RCA cables to carry an analog signal, a
Toslink cable to carry a digital optical signal or a digital coaxial cable.
NOTE: Using an optical, digital coaxial or RCA cables will not allow you to take advantage of the new Hi-Def (Un-
compressed) audio codecs that are offered on Blu-Ray discs.
Also of note: If your Blu-Ray player has 7.1 channel analog outputs you can connect it to the 7.1 channel inputs on the
UMC-1.
14