Motorola iM1000 User Manual page 29

Figure 30. RAS Access Setup Window
32. Click "Add". The Add RAS Device window opens.
If a modem is already inserted in the same COM port as the
data-capable modem, click "Remove" to remove it and then
click "Add".
Figure 31. Add RAS Devices Window
33. Make sure the COM port for your iX1000 modem is selected (COM1 in
this example).
34. Click "OK". The Remote Access Setup window now shows the added
COM port. Click "Continue".
35. Click "Close" on the Network Services Selection window.
Installation Instructions
N O T E
25