Jabra Evolve 65 SE MS Mono Manual

Jabra Evolve 65 SE MS Mono
How do I pair my Jabra Evolve 65 with my mobile device?
To pair your Jabra Evolve 65 with your smartphone, tablet, or other mobile
device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. To enter pairing mode, hold (3 seconds) the On/off/pairing switch in
the Bluetooth position until the LED flashes blue. Alternatively, wear
the headset to hear the pairing instructions.
The headset is now ready to pair with your mobile device.
3. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Evolve 65 from the list of available devices.
Enter "0000" (4 zeros) if you are asked for a pin code.
Note
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips,
Optionally, try using the
steps for pairing with a mobile device.
https://www.jabra.com/supportpages/jabra-evolve-65se/6593-833-309/faq/00cc28ed-
29a0-4c68-9df4-ceec90251fc2
Bluetooth Pairing Guide
see here.
which provides detailed
23/10/2022 20:18
Page 1 of 2