Philips S8870 Manual page 22

22
English
1
2
3
Ordering accessories
4 Remove the shaving heads from the shaving
head holder. Discard the used shaving heads
immediately to avoid mixing them with the new
shaving heads.
5 Place the new shaving heads in the shaving
head holder.
Note: Make sure the notches on both sides of
the shaving heads fit exactly onto the
projections in the shaving head holder.
6 Place the retaining ring holder on the retaining
ring, place it on the shaving head and turn it
clockwise to reattach the retaining ring. Repeat
this process for the other retaining rings.
7 Reattach the shaving head holder to the
bottom part of the shaving unit ('click').
To buy accessories or spare parts, visit
www.shop.philips.com/service or go to your
Philips dealer. You can also contact the Philips
Consumer Care Center in your country (see the
international warranty leaflet for contact details).
The following accessories and spare parts are
available:
- SH90 Philips shaving heads
- RQ560 Philips cleansing brush head