Mitsubishi Electric FR-POL-H400K Instruction Manual page 10

 Additional Instructions
Also note the following points to prevent an
accidental failure, injury, electric shock, etc.
Assumes that incorrect handling may cause an
accidental failure, injury, electric shock, etc.
Caution
Transportation and mounting
 When carrying products, use correct lifting gear to
prevent injury. Special attention must be paid to the
edges of the product.
 Do not install or operate the option unit if it is
damaged or has parts missing.
 Do not stand or rest heavy objects on the product.
 Check that the mounting orientation is correct.
 Prevent other conductive bodies such as screws
and metal fragments or other flammable substance
such as oil from entering the option.
 As the option is a precision instrument, do not drop
or subject it to impact.
 Use the inverter under the following environmental
conditions. Otherwise, the inverter may be
damaged.
Surrounding air -10°C to 50°C
temperature (non-freezing)
Ambient 90% RH or less
humidity (non-condensing)
Storage
-20°C to 65°C *1
temperature
Indoors (free from corrosive gas,
Atmosphere flammable gas, oil mist, dust and
dirt)
Maximum 1000m above sea level
Altitude/
2.9m/s
vibration
(directions of X, Y, Z axes)

Temperature applicable for a short
time, e.g. in transit.
 If halogen-based materials (fluorine, chlorine,
bromine, iodine, etc.) infiltrate into a Mitsubishi
product, the product will be damaged. Halogen-
based materials are often included in fumigant,
which is used to sterilize or disinfest wooden
packages. When packaging, prevent residual
fumigant components from being infiltrated into
Mitsubishi products, or use an alternative
sterilization or disinfection method (heat
disinfection, etc.) for packaging. Sterilization of
disinfection of wooden package should also be
performed before packing a product.
Trial run
 Before starting operation, confirm and adjust the
parameters. A failure to do so may cause some
machines to make unexpected motions.
2
2
or less at 10 to 55Hz
 Operation
Warning
 Do not modify the equipment.
 Do not perform parts removal which is not instructed
in this manual. Doing so may lead to fault or
damage of the inverter.
 Disposal
Caution
 Treat as industrial waste.
 General instruction
All illustrations given in this manual may have
been drawn with covers or safety guards
removed to provide in-depth description.
Before starting operation of the product,
always return the covers and guards into
original positions as specified and operate the
equipment in accordance with the manual.