Triggering - The Trigger Subsystem - Agilent Technologies 8163A Programming Manual

Triggering - The TRIGger Subsystem

Hardware Trigger Rearming
Triggering
trig:inp trig:inp:rearm
IGNore -
SMEasure ON
CMEasure ON
SMEasure OFF
CMEasure OFF
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System, & Agilent 8166A Lightwave Multichannel
System, Third Edition
Triggering - The TRIGger
Subsystem
The TRIGger Subsystem allows you to configure how the instrument
reacts to incoming or outgoing triggers.
Table 7 Triggering and Power Measurements
Software Triggering
init:imm init:cont
One power Automatically performs power
measurement is measurements.
performed.
Every hardware trigger starts a new power mea-
surement.
The first hardware trigger starts a new power mea-
surement. Further hardware triggers are ignored
until you send trig:inp:rearm again.
Measurement Operations & Settings
Data Acquisition Functions
sens:func:stat
MINMax LOGGing|STABility
Automatically performs power
measurements until the func-
tion is finished.
Every hardware trigger starts
a new power measurement
until the function is finished.
The first hardware trigger
starts the function. Subse-
quent power measurements
are automatically performed
until the function is finished.
Every hardware trigger starts
a new power measurement
until the function is finished.
The first hardware trigger
starts the function. Subse-
quent power measurements
are automatically performed
until the function is finished.
117