Turn It On & Off; Remove The Battery; Charge The Battery - Motorola W230 User Manual

remove the battery

Note: Your battery is intentionally tight fitting to
ensure consistent connection.

charge the battery

New batteries are not fully
charged. Plug the battery
charger into your phone and
an electrical outlet. Your
phone might take several
seconds to start charging
the battery. The phone
shows Charge Complete when finished.
Tip: Motorola batteries have circuitry that protects the
battery from damage from overcharging.
Tip: You can also use a PC USB port to charge your
phone battery. Before connecting your phone to your
PC, download and install the charging software driver
from www.motorola.com/support/W230a.
turn it on & off
To turn on your phone,
O
press and hold for a
few seconds or until the
display turns on.
If prompted, enter your four-digit unlock code. Your
phone's four-digit unlock code is originally set to 1234
or the last four digits of your phone number (see page
23).
To turn off your phone, press and hold
seconds.
O
for a few
get started 15