Asus TUF GAMING H770-PRO WIFI Manual page 28

For 2242, 2260 length
A.
B.
C.
D.
E.
4. Remove the plastic film from the thermal pads on the bottom of the heatsink.
5. Replace the heatsink.
If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it with
a thermal pad with a thickness of 1.25mm.
6. Secure the heatsink using the screws removed previously.
1-18
Remove the pre-installed removable M.2 Q-Latch screw at the 2280
length screw hole.
Install the M.2 Q-Latch to the M.2 length screw hole you wish to install
your M.2 to.
Rotate and adjust the M.2 Q-latch so that the handle points away
from the M.2 slot.
Install your M.2 to the M.2 slot.
Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
6
6
5
5
6
6
Chapter 1: Product Introduction