Sampling With Q-Fx - Akai Z4 User Manual

Recording stops automatically after the level of the input signal falls below the specified
threshold, and the message "Waiting for input signal..." appears, as shown below.
(Recording can also be stopped by pressing "STOP.")
Recording starts and stops automatically each time the input signal exceeds and falls
below the specified threshold until you stop it.
Press "FINISH" to end Auto Sampling.
7

Sampling with Q-FX

You can record Samples with FX as follows.
1 On the Record page, press "Q-FX."
The Quick FX window appears.
Select the "Mode" parameter, and use the JOG dial to select a mode.
2
OFF:
No Q-FX.
COMMAND:
recording mono or stereo Samples.
FX:
In this mode you can apply up to four FX while recording mono Samples (top win-
dow); two when recording stereo Samples (bottom window).
Use Q-FX, as shown. In this mode you can apply one or two Q-FX while
Sampling with Q-FX
Z4/Z8 User Guide—Version 1.0
27