Cleaning Modes - Shark Navigator Lift-Away NV392 Owner's Manual

WHOLE-HOME CLEANING
POWER/SURFACE SWITCH
Select surface setting:
O Power Off
I Bare Floor
For bare floors and small area rugs.
II Carpet
For high pile carpets.
BRUSHROLL INDICATOR LIGHT
INDICATOR LIGHT
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green: The brushroll is spinning and working as it should.
Solid Red: There is a jam in the brushroll area. Turn your vacuum off and remove any blockages
in the nozzle.
Flashing Red: The motorized floor nozzle is overheating. Turn your vacuum off and wait a
minimum of 45 minutes for it to cool down.
NOTE: For deep carpet cleaning per ASTM F 608, set to MAX suction and Carpet.
s h a r kc l e a n . c o m
SETTINGS
SUCTION CONTROL
Suction Control offers variable suction
based on your needs. Slide to MIN to reduce
suction and increase maneuverability on
carpets. Slide to MAX to increase suction
on bare floors.
WHOLE-HOME CLEANING

CLEANING MODES

UPRIGHT
To engage Brushroll, place foot on floor
nozzle and tilt handle back.
ABOVE-FLOOR—HANDLE
Press the Handle Release button to detach
the handle from the wand.
Lift
Away
LIFT-AWAY®
Press the Lift-Away button to detach the pod
from the floor nozzle.
NOTE: All accessories attach to either the wand or the handle.
ABOVE-FLOOR—WAND
Press the Wand Release button to detach
the wand from the pod.
LIFT-AWAY®
With pod removed, press the Wand Release
button to detach the wand from the pod.
s h a r kc l e a n . c o m