Using Speed Dialing - Motorola iDEN ic402 Phone Manual

Using Speed Dialing

You can store up to 900 numbers in your phone's speed dial
memory. With this feature, you can speed dial entries using
one key press for locations 2-9, two key presses for locations
10-99, and three key presses for locations 100-900.
Note: You must enable speed dialing before you can use it. See
"Calling Options" on page 83 for instructions.
Speed dialing is not available when you are roaming; when
you are roaming off the Nationwide Sprint PCS Network, you
must always dial using 11 digits (1 + area code + number).
For Speed Dial locations 2-9 (One-Touch Dialing):
Press and hold the appropriate key for approximately
two seconds. The display screen confirms that the
number has been dialed when it shows "Calling...".
For Speed Dial locations 10-99 (Two-Touch Dialing):
1.
Press the first digit.
2.
Press and hold the second digit for approximately two
seconds. The display screen confirms that the number
has been dialed when it shows "Calling...".
For Speed Dial locations 100-900 (Three-Touch Dialing):
1.
Press the first two digits.
2.
Press and hold the third digit for approximately two
seconds. The display screen confirms that the number
has been dialed when it shows "Calling...".
44 Section 2A: Making and Answering Calls