Motorola iDEN i88s User Manual page 119

6
The default date assigned to an event is the day that was highlighted
when you accessed the Event Form screen to add the event. To assign a
different date:
With the StartDate field highlighted, press B under CHANGE.
From the StartDate screen, enter the date of the event:
Type in the date, or press S to scroll through the months, days, and
years. Press T or press B under G to move through the fields.
Press A under DONE.
The Event Form screen returns with the Repeat field highlighted.
7 If you want the event to recur in your Datebook, assign a repeat cycle to
it:
With the Repeat field highlighted, press A under CHANGE.
From the Repeat screen, press S to scroll to the desired repeat cycle.
Press A under SELECT.
(If your appointment recurs more than one day a week, scroll to
Multiple Days and select as many days as apply. Then press A under
DONE.)
The Event Form screen returns with the RepeatEnd field highlighted.
NOTE: When Repeat is set to none or yearly, it will not be possible
to access the RepeatEnd field.
Press B under CHANGE and enter the date on which you want the
event to stop repeating. When you have finished, press A under
DONE.
The Event Form screen returns with the Alarm field highlighted.
Adding New Events
111