Checking Capacity; Creating Pauses And Waits; International Numbers - Motorola iDEN i2000 User Manual

Checking Capacity

To see how many numbers are stored in Contacts:
1 From the Contacts list, press m.
2 Select Capacity.

Creating Pauses and Waits

When storing a number, you can program your
phone to pause or wait between digits while
dialing. A pause makes your phone pause for 3
seconds before dialing further. A wait makes your
phone wait for your response before dialing further.
This feature is useful when using voice mail or
other automated phone systems that require you to
dial a phone number and then enter an access
number.
To program a pause:
Press and hold * until the letter P appears. The
P represents a 3-second pause.
If you store 17035551235P1234, when you select
this number and make a call, your phone dials the
first 11 digits, pauses for 3 seconds, then dials the
last 4 digits.
If you want a pause longer than 3 seconds, press
and hold * more than once. Each P represents a
3-second pause.
To program a wait:
Press and hold * until the letter W appears.
The W means your phone waits before dialing
further.
If you store 17035551235W1234, when you select
this number and make a call, your phone dials the
first 11 digits and then waits. A message appears
asking if you want to send the rest of the digits.
Press A under Yes to dial the last 4 digits.
Tip: You can create pauses and waits while
dialing a number from the keypad. See
"Creating Pauses and Waits While Dialing"
on page 47.

International Numbers

Note: This feature may not be offered by your
service provider.
When storing a number that you plan to use for
international calls, use Plus Dialing:
1 Press and hold 0 for two seconds. A "0"
appears, then changes to a "+".
Note: The network translates the "+" into the
appropriate international access code
needed to place the call.
2 Enter the country code, city code or area code,
and phone number.
Checking Capacity
39