Receiving A Picture - Motorola iDEN i2000 User Manual

Iden digital multi-service data-capable phone
Hide thumbs Also See for iDEN i2000:
Table of Contents

Advertisement

Using Send via PTT
3 Press the PTT button to send the picture.
4 Wait while the picture is transmitted. The Private
call is temporarily interrupted while a picture is
transmitted.
5 When prompted, press the PTT button to
resume the Private call.
Starting a Call by Sending a Picture
You can start a Private call after you capture a
picture with the camera or by choosing a stored
picture from the media center.
To do this, you must have the Private ID and IP
address of the person you want to send to stored in
your Contacts.
1 Capture a picture with the camera. See "Taking
Pictures" on page 97. -or-
From the media center, scroll to or select the
picture you want to send in a Private call.
2 Press m and select Send Picture via PTT.
A list of names from Contacts appears. These
names have Private IDs and IP addresses
stored.
3 Select the name of the person you want to send
the picture to.
4 Press the PTT button to send the picture.
118
5 Wait while the picture is transmitted. The Private
call is temporarily interrupted while a picture is
transmitted.
6 When prompted, press the PTT button to
resume the Private call.

Receiving a Picture

When someone sends you a picture using Send
via PTT, your phone emits tone or vibrates and a
message appears on the display asking you if you
want to accept the picture.
When you receive a picture, it appears every time
you are in a Private call with the person who sent it
unless you delete the picture from the media
center. This occurs for the last 20 people who sent
you pictures.
Accepting a Picture
1 When you see the message asking you if you
want to accept the picture, press A under Yes.
2 Wait while the picture is transmitted. The Private
call is temporarily interrupted while a picture is
transmitted.
3 When prompted, press the PTT button to
resume the Private call.
Tip: If you want to stop the transmission before it
is finished, press A under Cancel.

Advertisement

Table of Contents
loading

Table of Contents