Table of Contents
Advertisement
UG.GSM.E550.book Page 19 Friday, August 13, 2004 3:29 PM
Charging the Battery
New batteries are shipped partially charged. Before you can use
your phone, you need to install and charge the battery as described
below. Some batteries perform best after several full
charge/discharge cycles.
Action
1 Insert the travel charger
plug into your phone with
the release tab facing up.
Make sure that both of
the plug's connector
hooks engage to lock the
plug in place.
2 Plug the other end of the travel charger into the appropriate
electrical outlet.
Note: It make take up to 10 seconds for your phone to
provide a visible or audible indication that the battery is
charging.
3 When your phone indicates
tab and remove the travel charger.
Tip: You can safely leave the travel charger connected to the
phone after charging is complete. This will not damage the battery.
Charge Complete
, press the release
Getting Started - 19
Advertisement
Table of Contents
