Page 1
Installation, Operation, and Maintenance Trane Rental Services Fuel Tanks SAFETY WARNING Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.
Page 2
Practices requirements for arc flash protection, PRIOR to servicing the unit. NEVER PERFORM ANY Trane believes that responsible refrigerant practices are SWITCHING, DISCONNECTING, OR VOLTAGE important to the environment, our customers, and the air conditioning industry. All technicians who handle TESTING WITHOUT PROPER ELECTRICAL PPE AND ARC FLASH CLOTHING.
Page 3
Copyright This document and the information in it are the property of Trane, and may not be used or reproduced in whole or in part without written permission. Trane reserves the right to revise this publication at any time, and to make changes to its content without obligation to notify any person of such revision or change.
Model Number Descriptions Digit 1, 2 — Unit Function RS = Rental Services prefix Digit 3, 4 — Tank Type DT = Day Tank DD = DEF Tank Digit 5, 6, 7, 8 — Tank Volume 0100 1000 Digit 9, 10 — Design sequence Digit 11, 12 —...
General Information Overview The purpose of this IOM is to detail the proper handing, installation, and maintenance recommendations for Trane Rental Services Fuel Tanks. This equipment is designed Each fuel tank is provided with a nameplate and labels with and manufactured for efficient refueling of equipment the following information: and/or transportation of fuel.
Page 7
General Information Figure 1. Day tank components Hatch lid Filler cap (3-inch) Electric pump Fuel feed line/valve Fuel return line/valve Refueling hose Relief vent Fuel gauge Fuel feed line/with ball valve to fuel pump Figure 2. DEF tank components 2-inch RSV Container valve 2-inch SS Vent 2-inch Pump port 2-inch Pump port...
Unit Dimensions Day Tank - General Arrangement DEF Tank - General Arrangement 1176.88 mm 1176.88 mm 46.33 in. 46.33 in. 1155 mm 1155 mm 45.47 in. 45.47 in. 534 mm 534 mm 21.02 in. 1124 mm 21.02 in. 44.25 in. 1124 mm 44.25 in.
Installation and Decommission Please read this document in its entirety before attempting to off-load, install, or operate this tank. Transportation WARNING Heavy Objects! Failure to follow instructions below could result in unit dropping which could result in death or serious injury, and equipment or property-only damage.
Day Tank Operation 6. Connect the quick coupler on the pump discharge. WARNING 7. Open fuel feed line/valve on fuel tank. Flammable Fluids! 8. Connect a power supply to the pump (minimum 20 amp rating). Failure to follow the safety requirements in this section could result in death or serious personal injury, as well 9.
Day Tank Operation Day Tank To Generator Hose Connections Figure 6. Quick coupler to threaded end Figure 3. Hand nozzle Figure 7. Swivel-type coupling Figure 4. Quick coupler Figure 5. Quick coupler to threaded end SRV-SVX006C-EN...
Day Tank Operation DEF Tank Operation DEF Tank Electrical Connections The auxiliary Diesel Exhaust Fluid (DEF) Tank in figure The 24 Vac, 14-pin Deutsch connector (P/N: HD36-18-14SN) below can only be utilized in stand-alone mode with shall be used for power source connections typically from automated pump control for refueling.
Page 13
Day Tank Operation 2nd Generation Cummins generators (100-275kW towable) that have external DEF connections utilize the 14- Pin Deustch connector (P/N: HD34-18-14PN) w/ receptacles as shown below. Figure 9. Pin identification for auxiliary DEF electrical connector DEF Pump Power Supply, 24 Vdc DEF Pump Ground DEF Line Heater Ground DEF Line Heater Power Supply, 24 Vdc...
Page 14
Day Tank Operation 5. Insert plugs into all open terminal locations on 6. Harness is now ready to use. connectors as shown in picture below. DEF Tank Harness BOM Part # Description Vendor HD36-18-6SN Generator Side Connector Mouser 0462-201-16141 #16 Socket Terminal Mouser 114019-ZZ Large Seal Plug...
Page 16
For more information, please visit trane.com or tranetechnologies.com. Trane has a policy of continuous product and product data improvement and reserves the right to change design and specifications without notice. We are committed to using environmentally conscious print practices.