Backup, Memory; Programmed Recording; Changing Recording Settings; Memory Backup - Mitsubishi HS-U448 Owner's Manual

Timer Recording
Program skip using the POWER button
If you have entered only one program into your VCR's memory,
you can skip the program without going into the VCR's menus.
Simply press POWER on the front panel once. The programmed
recording light will turn off, and the program will be skipped. If you
decide not to skip the program, press POWER on the front panel
twice, the programmed recording light will light up again.
Changing timer recording settings
1 Press MENU on the remote control. Your VCR will turn on
and VCR Main Menu will appear. Press the ADJUST
buttons to select Program to record. Press ENTER.
2 Recap screen will display for 4 seconds. While this screen
is displayed, press the ADJUST buttons to place the cursor
arrow next to the program you wish to change. Press
ENTER. You will see the Program to record setting menu.
3 Press ENTER repeatedly to select the item you wish to
change. Use the ADJUST buttons to change it. Then press
ENTER repeatedly to return the altered program to the
Recap screen.
4 Press MENU twice to exit the menus. Then press POWER
to turn off the VCR. Make sure the programmed recording
light is on.
Canceling a timer recording before the recording starts
1 Press MENU on the remote control. Your VCR will turn on
and VCR Main Menu will appear on your screen. Use the
ADJUST buttons on the remote control to select Program to
record. Press ENTER.
2 Recap screen will display for 4 seconds. While this screen
is displayed, press the ADJUST buttons to place the cursor
next to the program you wish to cancel.
3 Press CANCEL. The program is erased.
4 Press MENU twice to exit the menus.

Memory backup

If the VCR is without power for 3 minutes or less, it will retain the
clock and the programmed settings. The VCR must have been
plugged in for at least an hour beforehand to charge this backup.
If the power is lost for more than 3 minutes, the time and the
programmed settings will be lost.
If you have set the Auto Clock set setting of the Set the clock
menu to ON, the auto clock function will automatically set the clock
again when power is restored.
Recap screen
¬Program to record
CH DAY ON
§ 2 MO11 11:30am
--- -- --:--
--- -- --:--
--- -- --:--
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬Program to record
ƒChannel
ƒDay
ƒStart time
ƒStop time
ƒRecord speed
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Recap screen
¬Program to record
CH DAY ON
§ 2 MO11 11:30am
--- -- --:--
--- -- --:--
--- -- --:--
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
OFF
1:30pm SP
--:-- SP
--:-- SP
--:-- SP
2
Monday 11
11:30am
1:30pm
EP
OFF
1:30pm SP
--:-- SP
--:-- SP
--:-- SP
29