Siemens SITRANS WS300 Operating Instructions Manual page 12

Installing/mounting
3.5 Mounting to a bend or snub pulley
Dimensions in mm (inch)
① Bend or snub pulley
② 3/8" drilled hole for arrestor rod ⑤ Tension spring
③ Stringer
Note
When mounting to a bend or snub pulley only a 3/8 inch (10 mm) drilled hole is required for
the arrestor rod.
12
④ Belt direction
⑥ Arrestor rod (cut to suit)
Operating Instructions, 04/2021, A5E45050935-AC
⑦ Flexible conduit
⑧ Pulley bearing
SITRANS WS300