Table of Contents
Advertisement
[Monitor Luminance]
Sets the monitor brightness according to the ambient light level.
(Auto)
(Mode 1)
(Mode 2)
(Mode 3)
●
Some subjects may look different from their actual appearance, but the recorded picture will not
be affected.
●
Setting [
] or [
[m/ft]
Select how distance is displayed, in Ft or M.
[Eye Sensor]
[Sensitivity]
[LVF/Monitor Switch]
[USB Mode]
Select communication method for when connecting camera to a computer or printer with
USB connection cable (supplied).
[Select on connection]
[PC(Storage)]
[PictBridge(PTP)]
205
During recording, the brightness is adjusted automatically according to how
bright it is around the camera.
During playback, the brightness is the same as when you last recorded.
(If you have not recorded once since turning on the camera, a standard
brightness is used.)
The brightness is increased.
The brightness is standard.
The brightness is decreased.
] reduces the operating time.
Use this setting to set the sensitivity of the eye sensor.
Use this setting to switch the display between the viewfinder and monitor.
[LVF/MON AUTO] (Automatic switching between viewfinder and monitor) /
[LVF] (Viewfinder display) / [MON] (Monitor display)
• After the display is switched using the [LVF] button, the setting of [LVF/
Monitor Switch] will also change.
Select communication method each time you connect to a
computer or PictBridge-compatible printer.
Select when connecting to a computer.
Select when connecting to a PictBridge-compatible printer.
Using Menu Functions
Menu list
→
[Setup]
Advertisement
Table of Contents
