Before Use; Care Of The Camera - Panasonic LUMIX DC-G95D Owner's Manual For Advanced Features

1.

Before Use

Care of the camera

Firmware of Your Camera/Lens
∫
Firmware updates may be provided in order to improve camera capabilities or to add
functionality. For smoother recording, we recommend updating the firmware of the
camera/lens to the latest version.
• For the latest information on the firmware or to download/update the firmware, visit the
following support website:
https://panasonic.jp/support/global/cs/dsc/
(English only)
• To check the firmware version of the camera/lens, attach the lens to the camera.
Handling of the Camera
∫
Do not subject the camera to strong vibration, impacts, or pressure.
These may cause a malfunction or damage.
– Do not drop or knock against hard surfaces.
– Do not push hard on the lens section or monitor.
If sand, dust, or liquid gets on the monitor, wipe it off with a dry soft cloth.
– If the monitor is closed when such liquids are present, malfunction may result.
– Touch operations may be incorrectly recognized.
Do not place a hand inside the camera mount.
This may cause a failure or damage because the sensor is a precision device.
If you shake the camera while turning the camera off, a sensor may operate or a
rattling sound may be heard. This is caused by the image stabilizer mechanism in
the body. It is not a malfunction.
Splash Resistant
∫
Splash Resistant is a term used to describe an extra level of protection this camera
offers against exposure to a minimal amount of moisture, water or dust. Splash
Resistant does not guarantee that damage will not occur if this camera is subjected
to direct contact with water.
In order to minimize the possibility of damage please be sure the following
precautions are taken:
– Splash Resistant works in conjunction with the lenses that were specifically designed to
support this feature.
– Securely close the doors, socket caps, contact points cover, flash, etc.
– When the lens or cap is removed or a door is open, do not allow sand, dust, and moisture to
enter inside.
– If liquid gets on the camera, wipe it off with a dry soft cloth.
13