Adjusting Focus And Brightness For The Touched Position - Panasonic LUMIX DC-G95D Owner's Manual For Advanced Features

4. Focus, Brightness (Exposure) and Color tone Settings

Adjusting focus and brightness for the touched position

Applicable modes:
> [Custom] >
MENU
[AF+AE]
1
Touch the subject you want to optimize the
brightness for.
• The AF area with the same function as [Ø] is displayed
on the touched position.
• The brightness optimization position is displayed on the
center of the AF area. The position follows the movement
of the AF area.
• [Metering Mode] is set to [
for the Touch AE.
2
Touch [Set].
• To cancel the focus and brightness set with [AF+AE], touch [
selected).
When the background has become too bright, etc.,
the brightness contrast with the background can be
adjusted by compensating the exposure.
• When recording with the Touch Shutter, the focus and brightness are optimized for the
touched position before recording takes place.
• At the edge of the screen, the metering may be affected by the brightness around the touched
location.
Not available in these cases:
• The [AF+AE] does not function in the following case:
– When using the Digital Zoom
– When [4K Live Cropping] is set
[Operation] > [Touch Settings] > [Touch AF] >
(P102)
], which is used exclusively
AE
106
] ([ ] when [Ø] is