Advertisement
Dimplex Optiflame Stove Fire
Models: Cassia Noir RTOFSTV20
Thank you for choosing a Dimplex electric fire.
General Information
Unpack the heater carefully and retain the packaging for possible future use, in the event of
moving or returning the fire to your supplier.
These models are designed to be free standing and are normally positioned against a wall.
The fire incorporates a flame effect, which can be used with or without heating, so that the
comforting effect may be enjoyed at any time of the year. Using the flame effect on its own only
requires little electricity.
A choice of 1kW or 2kW heat output is provided by the fan heater, which is located at the bottom
of the unit.
Before connecting the heater check that the supply voltage is the same as that stated on the
heater.
Please note: Used in an environment where background noise is very low, it may be possible to
hear a sound which is related to the operation of the flame effect. This is normal and should not
be a cause for concern.
Technical Information
Model No:
RTOFSTV20
Heat Output
Nominal Heat Output
Minimum Heat Output
Maximum Continuous Heat Output
Auxiliary Electricity Consumption
In Standby Mode
with mechanic thermostat room temperature control.
Electrical connection
WARNING – THIS APPLIANCE MUST BE EARTHED.
This heater must be used on an AC ~ supply only and the voltage marked on the heater must
correspond to the supply voltage. Before switching on, please read the safety warnings and
operating instructions.
Operating The Product
Controls - see Fig. 2
These main ON/OFF switch must first be turned ON to operate any of the other controls.
Setting
Flame Effect
Flame Effect & 1kW heat
Flame Effect & 2kW heat
To turn off any of the settings
P
Nom
P
min
P
max,c
el
SB
Operation
Press the 'I' button once
Press the 'I' button again
Press the 'I' button again
Press the'
'button once.
230V
240V
1.7
1.9
0.9
0.9
1.7
1.9
0.38
0.41
Indication
Bottom Neon
Bottom & middle neon
All 3 neons
kW
kW
kW
W
Advertisement
