Related Manuals for Neilsen DENT MASTER CT3789
Summary of Contents for Neilsen DENT MASTER CT3789
- Page 1 DENT MASTER CT3789 ORIGINAL INSTRUCTIONS SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE. Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM...
-
Page 2: Ec Declaration Of Conformity
EC DECLARATION OF CONFORMITY We CANNON TOOLS LTD 20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K. Declare that the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us. - Page 3 Due to continuing improvements, actual product may differ slightly from the product described here in. Tools required for assembly and service may not included. SPECIFICATIONS Glue Gun: 220V-240V~50Hz Crossbar Adjustment: 3” min to 5” max UNPACKING When unpacking, make sure that the item is intact and undamaged. Check that no parts are missing.
-
Page 4: Troubleshooting
size. The Dent Master will also not work on aluminium panels or surfaces. DENT REPAIR KIT-INSTRUCTIONS FOR USE TROUBLE SHOOTING: Ideal operation conditions: In the shade and with a temperature range from 10-26 The dent does not come out completely: It may take up to 10 pulls to achieve the desired result and even then it may not be 100% equalised. - Page 5 See diagram & parts information Part Description Hot Glue Gun Glue stick Release Agent Dent pulling tabs Pulling Bridge Wing Nut Glue Scraper Knockdown Adjuster Please note: Parts are listed and shown for illustration purposes only, and are not available as replacement parts.
- Page 6 WARNING: Using hand tools can be dangerous. Always use eye protection and other protective safety wear when using this product. Select the correct type and size of tool for work. Keep away from children. GLUE GUN – INSTRUCTIONS FOR USE The glue sticks to many surfaces including wood, plastic ,paper and cardboard OPERATION INSTRUCTIONS Step 1...
-
Page 7: Electrical Information
ELECTRICAL INFORMATION Warning Mains plug replacement (UK & Ireland only) If you need to replace the fitted plug of the tool, then follow the instructions below. Machines that are connected direct to mains supply. For machines that are double insulated, do not require a connection to earth. If in doubt consult a qualified electrician The wires are coloured as follows Blue... - Page 8 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...