Related Manuals for Neilsen CT3069
Summary of Contents for Neilsen CT3069
- Page 1 HOT GLUE GUN CT3069 ORINIAL MANUAL SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE. Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM...
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: HOT GLUE GUN Model: CT3069 Applicable EC Directives: EC Low Voltage Directive 2006/95/EC EC Directive of Electromagnetic Compatibility 2014/30/EU Harmonized standards：... - Page 3 Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may no to included. SPECIFICATIONS Glue Gun: 220V-240V/50Hz UNPACKING When unpacking, make sure that the item is intact and undamaged. Check that no parts are missing.
- Page 4 GLUE GUN – INSTRUCTIONS FOR USE The glue sticks to many surfaces including wood, plastic ,paper and cardboard OPERATION INSTRUCTIONS Step 1 Insert one of the glue sticks through the tunnel on the back of the gun Step 2 Plug cord into an electrical outlet and wait 5 minutes to heat up the glue.
-
Page 5: Electrical Information
ELECTRICAL INFORMATION Warning Mains plug replacement (UK & Ireland only) If you need to replace the fitted plug of the tool, then follow the instructions below. Machines that are connected direct to mains supply. For machines that are double insulated, do not require a connection to earth. If in doubt consult a qualified electrician The wires are coloured as follows Blue... - Page 6 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in china...