Change The Default Administrator Password; Using Quick Configuration To Set Up Email Management - SonicWALL Email Security 200 Getting Started Manual

Change the Default Administrator Password

1. Login to the SonicWALL Email Security appliance using the IP address you entered
in "Hostname and Networking" on page 13.
2. Navigate to the System > Administration page.
3. Enter a new management password into the Password field.
4. Enter it again in the Confirm Password field.
5. Click Apply Changes.

Using Quick Configuration to Set Up Email Management

The Quick Configuration page will walk you step-by-step through the configuration of
your SonicWALL Email Security appliance. Use this window the first time you configure
SonicWALL Email Security if you are installing SonicWALL Email Security as an All-In-
One server and have only one downstream server.
The information you enter for LDAP configuration is used to authenticate users as they
log into their personal Junk Boxes.
Note:
For detailed configuration instructions, refer to the SonicWALL Email Security
Administrator's Guide.
To use Quick Configuration:
1. Navigate to the System > Administration page.
2. Click Click Here for Quick Configuration.
3. In the Quick Configuration dialog box under Network Architecture, enter the host
name or IP address and the port into the Inbound destination server fields.
The inbound destination server is the email server that will accept good email after
SonicWALL Email Security removes and quarantines junk email. For example, this
could be the IP address of a Microsoft Exchange server. The default port is 25.
SonicWALL Email Security Getting Started Guide Page 19