Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Iridium Arc Bar Pro 1215 IP65 12x15W RGBW LED
Summary of Contents for Iridium Arc Bar Pro 1215 IP65 12x15W RGBW LED
- Page 1 Arc Bar Pro 1215 IP65 12x15W RGBW LED Product code: 113531...
-
Page 2: Product Overview
Product Overview DMX-IN POWER-IN MENU DOWN ENTER POWER-OUT DMX-OUT... -
Page 3: Mechanical Specification
Mechanical Specification 454.01mm 1017mm 85mm 68.5mm 140mm... - Page 4 Packaging: Thanks for your purchasing the AH019A. All the lights have been checked and are in excellent operating condition. Please check the shipping carton first. Because there maybe damage occurred during the shipment. Then check the lights carefully and be sure that the light is intact and works normally. In the event damage has been found, spare parts are missing or the lights works abnormally, please contact us for further instructions.
- Page 5 Features ● Light Source: 12*15W, 4 in 1 RGBW LEDs ● Lens:10*45°/8°/25°/40° ● Power consumption: 160W ● Voltage: AC 110-230V 50/ 60Hz ● Run mode: DMX 512 /Master Slave /Auto Run ● DMX channels: 3, 7, 11, 48 & 52 CH ●...
- Page 6 Displayer introduction ① ② ③ temp:043 ④ ADDRESS Key lock open ⑤ MENU DOWN ENTER 1. DMX means the light is in the DMX mode.Similarly,SLAVE means the light is in the SLAVE mode. 2. The color of the point shows the condition of signal transmission. Green represents the good condition, while red represents the signal is interrupted.
-
Page 7: Programme Menu
Programme Menu CHANNEL CHANNEL CHANNEL DMX CHANNEL CHANNEL ADDRESS CHANNEL ADDRESS Standard Stage/TV Archited DMX Curve Theatre Blackout DMX State DMX Hold Slave Slave Mode Auto Auto Mode Speed Green Static Color Blue White Color Strobe... - Page 8 2700K 8000K Dimmer ALL Set up green White Blance blue white Remote Key lock Display Max temp Password up down up down Working time 00000h - 0M Software Ver V.1.2 Info Hardware Ver V.1.0 RDM UID Factory Reset Passcode up down up down Wireless...
-
Page 9: Dmx Control Mode
DMX control mode Channel Value Function 0-255 Saturation 0-255 Value (Brightness) 0-255 0-255 Master Dimming(0~100%) 0-255 Dimmer curve 0-255 Red dimmer 0-255 Green dimmer 0-255 Blue dimmer 0-255 White dimmer Strobe 0-255 0-255 Master Dimming(0~100%) 0-255 Dimmer curve 0-255 Red dimmer 0-255 Green dimmer 0-255... - Page 10 0 - 255 0 - 255 Green Blue 0 - 255 White 0 - 255 0 - 255 0 - 255 Green Blue 0 - 255 White 0 - 255 0 - 255 0 - 255 Green Blue 0 - 255 0 - 255 White 0 - 255...
- Page 11 0 - 255 0 - 255 Green 48CH Blue 0 - 255 White 0 - 255 0 - 255 Master Dimming(0~100%) 0 - 255 Dimmer curve 0 - 255 Auto 0 - 255 Speed 0 - 255 0 - 255 Green 0 - 255 Blue...
- Page 12 0 - 255 0 - 255 Green 0 - 255 Blue 0 - 255 White 52CH 0 - 255 0 - 255 Green 0 - 255 Blue 0 - 255 White 0 - 255 0 - 255 Green 0 - 255 Blue 0 - 255 White...
-
Page 13: Dmx-512 Addressing With Id Address
DMX-512 addressing with ID address 1. Follow instructions 1 for DMX 512 addressing. 2. Activate ID addressing in each fixture by setting panel function “ID ON/OFF” to ON. “Settings” to “ID ON/OFF” to “ON” For every DMX 512 starting address the user can set 66 separate ID addresses. - Page 14 DMX MODE-In this menu,you can connect several pieces of lights with DMX cable and control them with the control console. Press ”ENTER” and then press “UP” or “DOWN” to ”Address” or “DMX Channel” and press “ENTER”. 1) “XXX” will be showed in “Address”, "XXX” means the Address 001-512. You can press “UP”...
- Page 15 CCT-In this menu, you can choose the brightness you desired. 1. Press “ENTER” and then press “UP” or “DOWN” to “CCT”. 2. Press “ENTER” you can chooose from “2700K” to “8000K” as you need. SET UP-In this menu, you can adjust the values of the function. 1.
- Page 16 Mounting When installing the unit, the trussing or area of installation must be able to hold 10 times the weight without any deformation. When installing the unit must be secured with a secondary safety attach-ment, e.g. and appropriate safety cable. Never stand directly below the unit when mounting, removing, or servicing the unit.
-
Page 17: Cable Connectors
CABLE CONNECTORS Cabling must have a male XLR connector on one end and a female XLR connector on the other end. DMX connector configuration GROUND caution:Do not allow contact between the ground and the fixture’s chassis ground. Grounding the ground can cause a ground loop, and your fixture may perform erratically. Test cables with an ohm meter to verify positive pole and to make sure the pins are not grounded or shorted to the shield or each other. - Page 18 IR Controller Power on/off button SLAVE DMX button,to control DMX AUTO AUTO SPEED address when press this SOUND SOUND button.It is channel mode when double click. STROBE DOWN Master-slave mode button. SLAVE Automatic mode button AUTO AUTO Speed adjustive button SPEED Sound mode button SOUND...
-
Page 19: Rdm---Remote Device Management
RDM---Remote Device Management RDM is a wild version of the DMX512-A protocol, allowing dimming stations and other control devices to be discovered through a DMX512 network, and then configuring, status monitoring, and managing intermediate and line end devices. It allows two-way communication between the lighting device or system controller and the connected RDM compatible device through the standard DMX. - Page 20 IMPORTER B&K LUMITEC ZI – 2 Rue Alfred Kastler – 67850 Herrlisheim – France www.bklumitec.com...