Declaration Of Conformity; Regulations - Worcester Greenstar HIU Installation And Maintenance Instructions Manual

Regulations

440
127 263
18 18
390
19
48
79 65 65 65 65 65
Fig. 5 Dimensions, sizes in mm
Fig. 6 Minimum clearances in mm for assembly and maintenance
Assembly in a cabinet
The minimum clearances specified below apply in addition to the normal
minimum clearances.
▶ Make sure that the temperature in the cabinet does not exceed 35 °C.
6
270
37
50
582
700
81
▶ Provide ventilation openings at the top and bottom each of which are
2
at least 240 cm .
Fig. 7
2.6

Declaration of conformity

The design and operating characteristics of this product comply with the
British requirements.
The UKCA marking declare that the product complies with all
the applicable British legislation, which is stipulated by
attaching these markings.
The complete text of the Declaration of Conformity is available on the
Internet: worcester-bosch.co.uk.
3 Regulations
▶ Observe updated regulations or supplements. These regulations also
apply at the time of installation.
▶ Observe all standards and guidelines applicable to the installation
and operation of the system in your country and region.
Standards and Guidelines
• Building Regulations Part L (conservation of energy in buildings)
• BS12502 Part 1 and 2
• HSG85 (electrical separation)
• GS38 (test equipment)
• BS7671 (IET wiring regulations)
• CIBSE CP1(2020) Heat networks code of practice for the UK
• Local standards and regulations for the electrical connection and
safety equipment of the water-filled heating system.
Greenstar – 6721852556 (2022/11)