Miele Optima II G2432SC Operating Instructions Manual page 40

Frequently asked questions
Issue
Dishes are not dry,
glasses and cutlery
are spotted.
White residue is
visible on cutlery
and dishes.
Clouding occurs on
glassware and film
can be wiped off.
40
Possible fault
The rinse aid setting may be
too low, or the rinse aid
reservoir is empty.
Dishes were taken out too
soon.
A "Tab" product was used.
These products have a low
drying effect.
The "Tab" setting is turned
on, but a normal product
was used.
Not enough rinse aid was
used.
The salt container is empty.
The salt container lid was
not correctly screwed on.
Unsuitable "Tab" products
were used.
The automatic water
softener unit is defective.
Solution
Increase the dosage, refill
the reservoir or switch the
rinse aid product when
refilling, see "Before using
for the first time".
Leave dishes in longer, see
"Use".
Set the Detergent setting for
a normal detergent and add
rinse aid.
Set the Detergent setting to
the detergent used, see
"Additional options - Tab".
Increase the dosage, see
"Before using for the first
time".
Refill the salt container, see
"Before using for the first
time".
Reseat it making sure it
screws back on correctly.
Change detergent, use
normal detergent.
Contact Miele's Technical
Service.