Grundig DAVIO 55 Manual page 20

MANUAL TUNING
Program 06
C/S Channel
Channel 00
Finetun. 00
Norm B/G (Universal)
Name RTL2
OK Memorize 0-9 •Tune
MANUAL TUNING
Program 06
C/S Channel
Channel 34
Finetun. 00
Norm B/G (Universal)
Name RTL2
OK Memorize •Change
DIALOG CENTER
LANGUAGE SELECTION
SLEEP TIMER
PARENTAL LOCK
SPECIAL FUNCTIONS
PROGRAM SORT
MANUAL TUNING
AUTOMATIC TUNING SYSTEM
SERVICE
OK
SERVICE
Color P 01 auto
IDP2
Service Code – – – –
20
SPECIAL SETTINGS
5
Select the line » Channel« with »,« or ».«, and use »F«
» 1... 0
on the »SELECT COUNTRY« preselection);
or start the ATS search with »
Notes:
TXT
Repeat the automatic channel search until the channel desired appears.
Cancel the automatic channel search with »TXT«.
The colour and sound standards are allocated automatically. If the colour
and/or the sound are not correct, select the line »Standard« with »,« or
».«. Select the setting required with »F« or »E«.
6
Select the line » Name« with »,« or ».«, and confirm with »
Select the position required with »E«, use »,« or ».« to select the letters
or digits required, and confirm with »
7
To fine tune the picture (when necessary), select the line » Finetun.« with
»,« or ».« and modify the fine tuning with »F« or »E«.
TXT
8
Save the setting with »OK«.
Note:
To set further TV channels, repeat points
9 Complete the setting with »TXT«.
Resetting all TV channels
All the TV channels can be reset (e.g. when you move town).
1
Call up »DIALOG CENTER« by pressing »
2
Select the line »AUTOMATIC TUNING SYSTEM« with »,« or ».« and
confirm with »OK«.
– The »SELECT COUNTRY« menu will be blended in.
TXT
3
Select a country with »,« or ».« and confirm with »OK«.
– The ATS search will start.
Adjusting colour standards manually
When the ATS search is used to set the TV channels, the colour standards are
allocated automatically. Do not carry out this setting if the colour is already well
adjusted on the various channels.
1
Call up » DIALOG CENTER« by pressing »
2 Select the line »SERVICE« with »,« or ».« and confirm with »OK«.
TXT
3
Select the line »Color« with »,« or ».« and select the colour standard
required with »F« or »E«.
4
Complete the setting with »TXT«.
Note:
The lines » IDP2« and » Service Code« are for the exclusive use of the author-
ised dealer.
____________________________________________________________________
to enter the channel number desired (or the frequency, dependent
«
« (blue).
F
F « (blue).
to 8.
3
i « and then »OK«.
i « and then »OK«.
»E« or
,
F « (blue).