Troubleshooting - Prince Castle DCFT-BKM Operation Manual

BURN/ELECTRICAL SHOCK HAZARD! Platen is HOT and can cause severe burns or severe shock.
Keep hands and objects out of the toaster unit! Failure to exercise caution may result in serious injury!
Turn the unit off, unplug it and let it cool down completely before touching or working on internal apparatus.
The plug removed from the outlet shall remain clearly visible to the operator during the maintenance procedure.
PROBLEM
Unit will not heat up.
Power rocker switch light off.
Unit will not heat up.
Power rocker switch light on.
Unit heats up,
but the conveyor does not run.
Unit under and over heats (does not
respond to thermostat adjustments).
Buns under or over done.
525-4122RrevA-EN

Troubleshooting

WARNING
POSSIBLE CAUSE
No power to unit.
Inoperable power cord.
Loose connection on power
switch.
Inoperable power switch
Inoperable thermostat.
Inoperable platen.
loose motor switch connection.
Inoperable motor.
Stripped drive gear and drive
train.
Loose chain sprockets.
Inoperable motor switch.
Inoperable thermostat.
Check platen adjustment. (See
Bun Compression section)
Check platen temperature. (See
Platen Temperature section)
13
Dual Continuous Feed Toaster
Ensure power cord is connected to proper
receptacle and the power inlet.
Replace power cord.
Tighten power switch connections.
Replace power switch.
Replace thermostat.
Replace platen.
Tighten motor switch connection.
Replace motor.
Replace drive gear and drive train.
Replace and tighten sprockets.
Replace switch.
Replace thermostat.
Adjust platen for proper compression.
Adjust thermostat for proper temperature.
Printed in China 08/20 © 2018
DCFT-BKM
SOLUTION