Login Screen Does Not Open - Mitsubishi Electric AE-200A Instruction Book

3. Login screen does not open

If the login screen of Integrated Centralized Control Web does not open, check the following setting using Initial
Setting Tool.
Note: To use Integrated Centralized Control Web, you need to configure the settings using Initial Setting Tool.
Important
● Check that the IP address of the AE-200/EW-50 that is the login destination for Integrated Centralized Control Web is correct.
(1) Click [Basic Settings] > [System Configuration] in Initial Setting Tool to open the System Configuration settings
screen.
(2) Enter the IP addresses of all the centralized controllers that are control targets of Integrated Centralized
Control Web and then click [Save].
(3) Click [Acquire data] from the [Data acquisition] menu to acquire the information on the air conditioning cooling
and heating integrated centralized control system.
(4) Click [Floor Settings] > [Floor for Integrated Centralized Control Web] to open the Floor for Integrated
Centralized Control Web settings.
(5) Check the number of the centralized controller displayed in "Target centralized controller."
(6) In the System Configuration screen, check the IP address of the centralized controller set for the checked
number of "Target centralized controller."
(7) Check that it matches the login destination IP address displayed as the URL of the browser.
System Configuration settings
③   C heck the destination IP address for the AE-200 of the
number checked in ② . (In this figure, 192.168.1.1 is
the destination IP address.)
WT07996X02
Floor settings for Integrated
Centralized Control Web
①
Acquire
data
②   C heck the number of the centralized controller
displayed in "Target centralized controller". (In this
figure, 1 is the number.)
187