Microtek ScanMaker V6UPL Installation Manual page 3

Parallel Port Installation on the PC
5. Install software
1. Insert the Microtek CD-ROM into your CD-
ROM drive. The Microtek Software Installer
screen should automatically come up.
Note: If the Microtek Software Installer screen does
not come up automatically, double-click "My
Computer" on your Windows desktop, then double-
click the CD-ROM icon to open it, and double-click
the CDsetup icon to start the installer program.
2. When the Microtek Software Installer screen
appears, click on each software program in the
order that it appears on the screen to install all
software components. You must install
ScanWizard 5 in order to operate your scanner.
All other software programs are optional.
For each software title, follow the on-screen
instructions during installation. Default values
are specified at every point during installation;
simply accept these values to continue
installation until you finish.
In some applications, auxiliary information (such
as the Readme file) may be displayed after that
particular program finishes installing. Simply
click the "X" close box at the upper right corner
of the displayed window to return to the
Microtek Software Installer. Do not restart
your computer until all the software has
been installed.
Here is a list of software on your Microtek CD.
a) Microtek ScanWizard 5. This is your scanner
controller program for capturing images from
your scanner and delivering it to your image-
editing application. Follow the on-screen
instructions during installation.
When the Select Components dialog box
appears, choose Parallel (Printer Port) as
your interface, then click Next to continue.
A dialog box appears next, asking if you wish to
test to make sure the connections are correct.
Click Yes to test the scanner connection. The
result of the check is displayed.
Next, you will be asked to let the SwissKnife
utility check your system for high-performance
parallel ports; click Yes.
When done, your scanner will be found, with
the driver installation complete. Click Finish to
go back to the Microtek Software Installer
program to continue installing the rest of the
software.
b) Ulead PhotoImpact. This is a full-featured
image-editing program.
c) Caere OmniPage Limited Edition. This is
your OCR text-scanning software. During
installation of OmniPage Limited Edition, you
will be asked to select your "Source". Make sure
Microtek ScanWizard 5 is selected. At the end
of installing OmniPage Limited Edition, select
"No, I will restart my computer later"
instead of "Restart your computer".
d) Caere PageKeeper Standard. This is your
document management program.
e) Adobe Acrobat Reader. This is your
documentation reader for reading and printing
the manuals on the CD-ROM.
3. After all the software has been installed, click
EXIT at the bottom left of the Microtek
Software Installer screen.
4. Insert your Adobe PhotoDeluxe software CD
into your CD-ROM drive, and follow the on-
screen prompts to install the software.
5. Restart your computer at the end of all software
installation.
3