Microtek ScanMaker 5700 Install Manual page 6

2. To scan slides or films, you will need to place the
Transparency Template on top of scanner bed as
illustrated below: : : : :
3. Place films (or slides) on the scanner bed by locating
them within the template window area, then carefully
pull down the FilmView cover.
Position films (or slides)
inside the template window
(flip side up)
4. Then follow the procedures (Steps 2, 3, and 5) in
scanning photos. For Step 4, select film (for scanning
positive film) as your Original.
: For more details on scanning, refer to Microtek's
NOTE
Step-by-Step Tutorial guide included in your package.
Position template
with the window
end pointed
toward the front
panel
Choose "Positive
Film" if original is
slide or positive
film
Choose "Negative
Film" if originals are
filmstrips
2. Scan text document
for editing
The Optical Character Recognition (OCR) is a
feature of ScanWizard 5 that converts scanned
documents into text file format. Output may be
saved as file or immediately sent to your word
processing application for further editing.
: You can also perform OCR scanning with the one
NOTE
touch OCR button provided in the scanner front panel (see
Section, "Smart scanning with one-touch buttons").
1. Place the text document (text side down) on the
scanner bed, then launch ScanWizard 5.
2. Click the following buttons and select the following
options if you are scanning text document for OCR
purposes:
Original: Original Original
Original Original
Select Text Document.
Scan T Scan T ype ype
Scan T Scan Type Scan T ype ype:
Only Black & White option is
available if you selected Text
Document as your Original
(previous step).
: When scanning colored documents, you must
NOTE
select: Photo and use either True Color/Web Color unless
B/W is the chosen output.
Purpose Purpose Purpose: Purpose Purpose
Select OCR Text.
3. Click and hold the Scan to button. When the options
menu appears, select OCR.
6