Cancel Button - Microtek ScanMaker 3700 Supplementary Manual

Filename: Refers to the prefix or root name in a series of filenames. By default, the root
filename is "Image". If the TIFF file format is selected, the scanned images will be
automatically identified as "Image001.tif", "Image002.tif", etc. You can change the
default root filename to uniquely label your scan jobs.
File Format: PDF is the default image file format.
Save multiple images as a single file: Allows you to save the scanned images into a
single file. You can enable this option if the scan frame is "Fixed Size" and the output
image file format is DCX, PDF, or TIF. When enabled, MSC will prompt you to place the
next page as you scan from the scanner bed, then click the Continue button to scan; or
click the Close button to save multiple images as a single file. If you scan through ADF,
the scanning originals are sequentially scanned until paper out; when finished, all the
scanned images are saved as a single file.
OK button
Confirms and saves the parameters currently specified for the Scan Smart-Touch button
on your scanner. The next time you press the Scan button, the defined and saved
settings are retrieved as your current settings.

Cancel button

Abandons the parameters you have just made under the Scan tab panels; all the
parameters are restored to their previous settings.
Reset button
Clears all the parameters you have just made under the Scan tab panel; all the
parameters are reset to their default settings.
Help (?) button
Provides answers to any queries regarding the MSC utility and scanner button functions.
Simply click the Help (?) button located at the bottom right (bottom left for Mac) corner
of the MSC panel. To search for a topic, click the Index tab, then type a word associated
with your question. You will be prompted for a short definition that will link you to a
related topic.
file:///D|/msc/WebHelp/panel_Scan.htm (4 of 4) [8/20/03 2:28:28 AM]