The Save Button; The Add Button; The Check Button; The Delete Button - Microtek ScanMaker 35T Plus User Manual

Save button
The Save button lets you save the settings in a scan job to a scan job template that can be
used for future scan jobs. To use the Save button:
1 Click on the Save button.
When a dialog box appears, give a name to the scan job template to be saved, then
2
click OK.
Add button
The Add button lets you add a scan job from a scan job template saved previously. To use

the Add button:

1 Click on the Add button.
When a dialog box appears, specify the name of the scan job template to be added,
2
then click Add. To close the dialog box, click Close.
Check button
The Check button allows you to select the scan jobs to be scanned. When you then click
on the Scan button to start scanning, the scan jobs marked by a check are the ones that
will be scanned. The Check button is a toggle. To use the Check button:
1 In the Title area of the Scan Job window, select the scan job to be scanned.
Click on the Check button. A check will appear next to the selected scan job.
2
To uncheck a selection, select the scan job to be unchecked, and click on the Check
3
button again. The scan job will be unchecked, and the scan job will not be scanned
when you click on the Scan button.
Delete button
The Delete button lets you delete a scan job from the list. To use the Delete button:
In the Title area of the Scan Job window, select the scan job to be deleted.
1
2 Click on the Del button. The scan job is deleted.
Reference 87