The Scanner Menu
The Scanner Menu lets you:
• Show your scanner model or select a scanner if you have multiple scanners
• Get information about your scanner
• Get information about the SCSI chain
Scanner Model
The top of the scanner menu displays the
you have multiple scanners on your system, all the scanners are shown with their
respective SCSI IDs, and the current scanner is indicated by a check.
Only one scanner can be accessed at a time. To switch among various scanners, select
the scanner to be used.
Get Current Scanner Info
This command provides information about your current scanner. A dialog box appears
showing the scanner model, SCSI ID number, firmware version, and other relevant
information.
scanner model
The scanner is displayed
here with its SCSI ID. The
The current scanner is
marked by a check.
you're using and its
SCSI
Reference
ID. If
5-5