Ford Fiesta 2010 Owner's Manual page 158

Audio units without a telephone keypad
can also end a call by pressing the MODE
button on the remote control.
Redialling a number
1. Press the PHONE button.
2. Press the arrow buttons until CALL
LISTS is displayed.
3. Press the OK button.
Note: If the active phone does not
provide a call out list, the last outgoing call
number/entry can be redialled.
4. Press the up/down buttons to select
the desired call list.
5. Press the OK button.
6. Press the up/down buttons to select
the desired phone number.
7. Press the OK button.
Redialling the last dialled number
1. Press the PHONE button.
2. Press the arrow buttons until REDIAL
is displayed.
3. Press the OK button.
If you have an audio unit with a telephone
keypad:
1. Press the PHONE button.
2. Press the OK button.
3. Press function button 2.
Receiving an incoming call
Accepting an incoming call
Incoming calls can be accepted by
pressing function button 1 or the MODE
button on the remote control.
Rejecting an incoming call
Incoming calls can be rejected by
pressing function button 4.
Telephone
Receiving a second incoming
call
Note: The second incoming call function
must be activated in your phone.
If there is an incoming call whilst there is
an ongoing call, a beep will be heard and
you will have the option to end the active
call and to accept the incoming call.
Accepting a second incoming call
Note: The first incoming call will be
disconnected and replaced by the
second incoming call.
Second incoming calls can be accepted
by pressing function button 1.
Rejecting a second incoming call
Second incoming calls can be rejected by
pressing function button 4.
Muting the microphone
Note: During a call, it is possible to mute
the microphone. Whilst muted,
confirmation will appear in the display.
Press function button 1. Press the button
once again to turn this function off.
Changing the active phone
Note: Phones must be bonded to the
system before they can be made active.
Note: After bonding a phone to the
system, this becomes the active phone.
1. Press the PHONE button.
2. Press the up/down buttons until
SELECT PHONE is shown.
3. Press the OK button.
4. Scroll through the different stored
phones by using the up/down buttons
to display the bonded phones.
5. Press the OK button to select the
phone which is to be the active phone.
156
(G1084336)